home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Floppyshop 2
/
Floppyshop - 2.zip
/
Floppyshop - 2.iso
/
diskmags
/
0022-3.564
/
dmg-0120
/
192.txt
< prev
next >
Wrap
Text File
|
1997-04-16
|
27KB
|
698 lines
Info-Atari16 Digest Thu, 4 Apr 91 Volume 91 : Issue 192
Today's Topics:
Atari cpu evolution
Bad news formatting from a Fidonet gateway
Connecting Macintosh Hard Disks to Atari
Copying protected disks
Does Lode Runner game exist for the ST?
Flicker Palettes (with minimum flicker)
Flicker Palettes [was Re: Graphics on the STE...] (2 msgs)
help with boot sector info
Hybrid Arts Sequencers?
MEGA STE trouble
Mice (2 msgs)
Spectrum/3-D/animation (2 msgs)
Stalker/Steno & Diamond Back II w/Cache
union demo 2 (2 msgs)
Welcome to the Info-Atari16 Digest. The configuration for the automatic
cross-posting to/from Usenet is getting closer, but still getting thrashed
out. Please send notifications about broken digests or bogus messages
to Info-Atari16-Request@NAUCSE.CSE.NAU.EDU.
Please send requests for un/subscription and other administrivia to
Info-Atari16-Request, *NOT* Info-Atari16. Requests that go to the list
instead of the moderators are likely to be lost or ignored.
If you want to unsubscribe, and you're receiving the digest indirectly
from someplace (usually a BITNET host) that redistributes it, please
contact the redistributor, not us.
----------------------------------------------------------------------
Date: 4 Apr 91 18:29:31 GMT
From: noao!ncar!elroy.jpl.nasa.gov!jato!vsnyder@arizona.edu (Van Snyder)
Subject: Atari cpu evolution
To: Info-Atari16@naucse.cse.nau.edu
In article <2318@lee.SEAS.UCLA.EDU> plinio@turing.seas.ucla.edu (Plinio
Barbeito) writes:
>...
>Sounds great, but it is just that -- a promise. Has intel ever made
>good on the promise that its i860 would run at 50MHz so that the 150
>max MIPS figure hyped by the press could come to light?...
The 150 MIPS figure is the speed it's guaranteed not to exceed :-)
--
vsnyder@jato.Jpl.Nasa.Gov
ames!elroy!jato!vsnyder
vsnyder@jato.uucp
------------------------------
Date: 4 Apr 91 12:17:36 GMT
From:
noao!ncar!elroy.jpl.nasa.gov!sdd.hp.com!spool.mu.edu!cs.umn.edu!thelake!steve@a
rizona.edu (Steve Yelvington)
Subject: Bad news formatting from a Fidonet gateway
To: Info-Atari16@naucse.cse.nau.edu
I'm posting this message because mail to the offending site has gone
unanswered, and because I'm getting repeats of this stuff.
A Fidonet gateway is not properly formatting messages for Usenet and
possibly not properly counting bytes when batching news. The results are
that messages are being transmitted with the text in a single line, and
that subsequent messages are being lost because rnews gets out of synch
with the batch. (This may be a matter of the long line overflowing an
input buffer.)
Following is the bad news. I will fold the long lines; if they don't
begin here with a > character they're a continuation. Note that the last
line in each item is the #!rnews header of the following item.
Item one:
>From rnews Thu Apr 4 00:59:40 1991
>Path:
cs.umn.edu!uc!shamash!timbuk!uunet!attcan!telly!moore!eastern!egsgate!FredMail
>Newsgroups: comp.sys.atari.st
>Subject: TT video modes
>Message-ID: <669369942.1@egsgate.Fidonet.Org>
>Date: 17 Mar 91 18:45:34 GMT
>Sender: FredMail@p0.f98.n250.z1.Fidonet.Org
>Lines: 4
>
>Well the TT has a 320x480 mode with 256 colours at once. It has a
1280x960 mono mode and a 640x480 mode with 16 colours. It is also
supposed to have a special gray scale modem (not too many people are
aware of) that displays 256 levels of gray scale in
the TT 320x480 low resolution. All this from a pallete of 4096.
>
>S.S.
>
>#! rnews 513
Item two:
>Path:
cs.umn.edu!uc!shamash!timbuk!uunet!attcan!telly!moore!eastern!egsgate!FredMail
>Newsgroups: comp.sys.atari.st
>Subject: Toaster & ST (was: re: LEXICOLOR, Atari TT/030,...
>Message-ID: <669369942.3@egsgate.Fidonet.Org>
>Date: 17 Mar 91 18:51:00 GMT
>Sender: FredMail@p0.f98.n250.z1.Fidonet.Org
>Lines: 4
>
>Don't worry, we have the ParSEC board and some others coming from
Lexicor Corporation.
>
>S.S.
>
>#! rnews 470
----
Steve Yelvington / P. O. Box 38 / Marine on St. Croix, MN 55047 USA
INTERNET: steve@thelake.mn.org UUCP: plains!umn-cs!thelake!steve
GEnie: S.YELVINGTO2 Delphi: YELVINGTON
------------------------------
Date: 4 Apr 91 20:16:46 GMT
From:
noao!ncar!elroy.jpl.nasa.gov!swrinde!zaphod.mps.ohio-state.edu!think.com!laird@
arizona.edu (Laird Popkin)
Subject: Connecting Macintosh Hard Disks to Atari
To: Info-Atari16@naucse.cse.nau.edu
In article <1991Mar25.130049.11679@santra.uucp> s37837k@saha.hut.fi (Jari Lehto)
writes:
>In article <1991Mar24.104528.13341@mailer.cc.fsu.edu> boyd@nu.cs.fsu.edu
writes:
>>zimm@leland.Stanford.EDU (Dylan Yolles) writes:
>>>my ST hard drive? How do I go about doing 2)? What is the chance
>>>that this won't work at all? (The hard drive I'm planning to connect
>>>is one of the Syquest 44 meg removable's; probably the one made
>>>by Jasmine.)
>>
>> ~~~~~~~
>>
>>Huh? I thought they were all made by Syquest! I am soon to purchase one of
>
>There are many removables with different names, but the mechanism is always
>by SyQuest. How about Atari Megafile 44? It is an example of this...
>Under the name of SyQuest there are only the base SCSI-units... The drives
>(if external) are always named after the maker of the housing...
>
> Jartsu
>
Actually, there are a number of manufacturers of removable mechanisms
(Bernoulli, Syquest, and Ricoh are most popular). Each of these mechanisms
have their own advantages and disadvantages. Syquests are cheapest and
most common, but are relatively unreliable, causing a number of companies
in the Mac market to avoid or drop them. Ricohs are a new technology
which promises to be quite reliable, but are also more expensive.
Bernoullis are the most expensive, but are an established, reliable
technology. There are also more "exotic" technologies such as
megneto-optical drives, flopticals, and so on.
> ... the maker of the housing ...
Those mechanisms are used by a large number of companies, who add a case,
power supply, cables, driver software, documentation, and perhaps other
bundled software. The other factors are how much testing the company does
on the mechanisms it ships (to weed out failures), the quality of their
engineering, and the warranty and service that they provide. While some
companies may just be "the maker of the housing" there is a lot more than
that going on at any quality drive vendor.
- Laird "I spent years working in the Mac hard drive industry" Popkin
------------------------------
Date: 4 Apr 91 23:48:54 GMT
From:
noao!ncar!elroy.jpl.nasa.gov!sdd.hp.com!uakari.primate.wisc.edu!unmvax!uokmax!k
llove@arizona.edu (Kenneth L Love)
Subject: Copying protected disks
To: Info-Atari16@naucse.cse.nau.edu
In article <XZkqZ1w163w@bluemoon.uucp> eudyeudy@bluemoon.uucp (Scott Eudy)
writes:
>
> 1)Pro Copy this is a standard copier that works pretty well
> 2)A Copy the best one I think it works well
I'm looking to get a legal copy of the two programs mentioned above. Does
somebody have the companies' addresses?
>
>Scott D. Eudy
>Chairman Explorer Officers Association Central Ohio Division
>Vice President Explorer Post 891
>eudyeudy@bluemoon.uucp
>
Kenneth Love
STix Secretary
------------------------------
Date: 4 Apr 91 23:23:21 GMT
From:
noao!asuvax!cs.utexas.edu!wuarchive!sdd.hp.com!spool.mu.edu!munnari.oz.au!brolg
a!uqcspe!cs.uq.oz.au!warwick@arizona.edu (Warwick Allison)
Subject: Does Lode Runner game exist for the ST?
To: Info-Atari16@naucse.cse.nau.edu
In <1991Apr3.205704.8441@unislc.uucp> bj@unislc.uucp (Bruce Jones) writes:
>The subject says it all. I would like to get Lode Runner for the
>ST if it exists. If yes, does someone want to sell their copy? If
>the answer is no are there any similar type games that you can recommend?
Try Runner in the atari/games directory on atari.archive.
I'm not sure, but I DID get a games from there that was EXACTLY like
lode runner. (Jeff Weiner's Index says "??" for that game, so email him
if it is indeed Load Runner - I'm pretty sure it is).
Warwick
--
_--_|\ warwick@cs.uq.oz.au
/ * <-- Computer Science Department,
\_.--._/ University of Queensland,
v AUSTRALIA.
------------------------------
Date: 4 Apr 91 23:13:41 GMT
From:
noao!ncar!zaphod.mps.ohio-state.edu!sdd.hp.com!news.cs.indiana.edu!msi.umn.edu!
noc.MR.NET!ns!ns!logajan@arizona.edu (John Logajan)
Subject: Flicker Palettes (with minimum flicker)
To: Info-Atari16@naucse.cse.nau.edu
Howard Chu suggests alternating frames (flicker palettes) to increase
the apparent number of available intensities per pixel R G or B.
He also (cleverly) suggests an unbalanced duty cycle -- two frames
of palette X and one frame of palette Y.
Dave Baggett mentions that some combinations of flicker intensities
are unsatisfactory, especially flickering between two extremes.
So I have made some tables of the possibilites of such an unbalanced
duty cycle flicker method. In the first table you can see the
redundancy of many of the intensity values. For instance many of
the intensities can be derived four different ways.
Y Palette value (1/3 duty cycle)
7 6 5 4 3 2 1 0
| | | | | | | |
7 - 21 20 19 18 17 16 15 14 . . . . . . . . . . . . . .
6 - . . 19 18 17 16 15 14 13 12 . . . . . . . . . . . .
5 - . . . . 17 16 15 14 13 12 11 10 . . . . . . . . . .
4 - . . . . . . 15 14 13 12 11 10 9 8 . . . . . . . .
3 - . . . . . . . . 13 12 11 10 9 8 7 6 . . . . . .
2 - . . . . . . . . . . 11 10 9 8 7 6 5 4 . . . .
1 - . . . . . . . . . . . . 9 8 7 6 5 4 3 2 . .
0 - . . . . . . . . . . . . . . 7 6 5 4 3 2 1 0
| | | | | | | |
~ 7 6 5 4 3 2 1 0
|
|----- X Palette value (2/3 duty cycle)
In case you can't understand the above table, the one below puts the
Y palette value in better alignment and throws out selected redundancies.
Y Palette value (1/3 duty cycle)
7 6 5 4 3 2 1 0
| | | | | | | |
7 - 21 20 . . . . . .
6 - 19 18 17 . . . . .
5 - . 16 15 14 . . . .
4 - . . 13 12 11 . . .
3 - . . . 10 9 8 . .
2 - . . . . 7 6 5 .
1 - . . . . . 4 3 2
0 - . . . . . . 1 0
~
|
|----- X Palette value (2/3 duty cycle)
Finally, I have a table of average values of intensity.
Note that the difference between X and Y values is never
greater that +or- 1. This should minimize the AC ability
of the eye to detect flicker. If our eyes were DC only,
then any of the other redundant combinations would have
worked as well. :-)
X X Y # Intensity (average)
----- -- ---------
7+7+7 = 21 = 7
7+7+6 = 20 = 6.666
6+6+7 = 19 = 6.333
6+6+6 = 18 = 6
6+6+5 = 17 = 5.666
5+5+6 = 16 = 5.333
5+5+5 = 15 = 5
5+5+4 = 14 = 4.666
4+4+5 = 13 = 4.333
4+4+4 = 12 = 4
4+4+3 = 11 = 3.666
3+3+4 = 10 = 3.333
3+3+3 = 9 = 3
3+3+2 = 8 = 2.666
2+2+3 = 7 = 2.333
2+2+2 = 6 = 2
2+2+1 = 5 = 1.666
1+1+2 = 4 = 1.333
1+1+1 = 3 = 1
1+1+0 = 2 = 0.666
0+0+1 = 1 = 0.333
0+0+0 = 0 = 0
--
- John Logajan @ Network Systems; 7600 Boone Ave; Brooklyn Park, MN 55428
- logajan@ns.network.com, 612-424-4888, Fax 612-424-2853
------------------------------
Date: 4 Apr 91 23:36:05 GMT
From:
noao!asuvax!ukma!rex!samsung!uakari.primate.wisc.edu!sdd.hp.com!spool.mu.edu!mu
nnari.oz.au!brolga!uqcspe!cs.uq.oz.au!warwick@arizona.edu (Warwick Allison)
Subject: Flicker Palettes [was Re: Graphics on the STE...]
To: Info-Atari16@naucse.cse.nau.edu
In <1991Apr4.052519.9240@wam.umd.edu> dmb@wam.umd.edu (David M. Baggett) writes:
>Anybody know how to algorithmically pick colors that always blend?
Colours with a similar lumminance will blend fine.
>Maybe if we assigned everyone reading this newsgroup a color combination
>to try and compiled the results... (Heck, there are only 262,144 different
>combinations. Aren't there supposed to be tens of thousands reading
>this group? Well then, that's only, what, 10-20 per person? I'll start
>the ball rolling with 000 and 001...)
Hmm, let's see, two palettes of 16 colours, each colour has 512 choices.
That's 512 to the power of 32. Which is the measley small value of
49732323640978664215538224814682084010045615079734771744046397689315949701253337
5533056
different palette pairs, less equivalent pairs.
okay, I'll do 2 and 3. :-)
No, but I'll check out the technique a bit more, using the pallette described
in the fractint post.
Warwick.
--
_--_|\ warwick@cs.uq.oz.au
/ * <-- Computer Science Department,
\_.--._/ University of Queensland,
v AUSTRALIA.
------------------------------
Date: 4 Apr 91 22:35:06 GMT
From:
noao!ncar!elroy.jpl.nasa.gov!sdd.hp.com!spool.mu.edu!snorkelwacker.mit.edu!bloo
m-beacon!eru!hagbard!sunic!dkuug!imada!micro@arizona.edu (Klaus Pedersen)
Subject: Flicker Palettes [was Re: Graphics on the STE...]
To: Info-Atari16@naucse.cse.nau.edu
dmb@wam.umd.edu (David M. Baggett) writes:
>Anybody know how to algorithmically pick colors that always blend?
>Given such an algorithm, one could write a program to find an "optimal
>flicker palette" -- one where the most combinations possible were
>rock-solid.
You can try to pick colors that have aprox. the same intensity. To this
you can use the NTSC formular :
Luminosity = 0.299*Red + 0.587*Green + 0.114*Blue
I have some code at here that can display 256 graylevels on the mono screen.
(written in C). The program is less than 50 lines long, and features
an advanced errordiffusion ditering algoritm, with a small edge sharping
filter (simple laplace). This have been coupled with a 3 screen 'flicker'
mode. The result is approx. the same as 256 grayscale VGA LCD screens (I
think mine is better, because there is no shadows running around the screen,
but...)
The 3 screens is build to that the 'on' pixels is equally distributed on the
3 'planes' - this avoids flicker.
All this could used with color too, and I think the result would be even
better because you can pick colors which is closer to each other (than on and
off)...
In color mode you can probaly show true-color, but you will need to make some
additional code, to handle interesting subjets - such as picking reprensative
colors from the picture file...
The program IS quick hack, and therefor it only runs on mono in 640x400.
I will send the source to who-ever that is interested...
Klaus (micro@imada.dk)
------------------------------
Date: 4 Apr 91 23:28:04 GMT
From:
noao!ncar!elroy.jpl.nasa.gov!usc!snorkelwacker.mit.edu!thunder.mcrcim.mcgill.ed
u!quiche!depeche@arizona.edu (Acme Instant Dehydrated Boulder Kit)
Subject: help with boot sector info
To: Info-Atari16@naucse.cse.nau.edu
I have quite a bit of ST disks which don't have the MSDOS bootsector.
The ones that were formatted under tos1.4 are reading fine on my PC,
but the ones formatted with TURTLE are unreadable.
Could some kind soul please e-mail me information about how to make an
ST disk readable on a PC by changing whatever sector is needed to be
changed through Norton Utilites?
--
|S. Alan Ezust : McGill University School of Computer Science |
|depeche@cs.mcgill.ca : Montreal, Quebec, Canada |
|---------------------------------------------------------------------------|
------------------------------
Date: 4 Apr 91 16:46:35 GMT
From:
noao!ncar!elroy.jpl.nasa.gov!swrinde!zaphod.mps.ohio-state.edu!sol.ctr.columbia
.edu!emory!wrdis01!nstn.ns.ca!bonnie.concordia.ca!ccu.umanitoba.ca!herald.usask
.ca!alberta!arcsun.arc.ab.ca (Bob Erkamp)
Subject: Hybrid Arts Sequencers?
To: Info-Atari16@naucse.cse.nau.edu
In article <1540013@hpcc01.HP.COM> wright@hpcc01.HP.COM (Jeff Wright) writes:
>Well, I was able to obtain enough information from Hybrid Arts to
>convince me to place an order for "EditTrack Gold." This product
>is the successor to EditTrack II, and will be shipping at the end
>of this week (if you believe software companies:-).
>
>This product does not sound at all like the typical crippled entry
>level sequencer (e.g., 60 track limit vs. 12 in Tiger Cub). As far
>as I can tell, the only thing that it lacks from the top end "SMPTE
>Track" sequencer is the SMPTE support. And the price is right -- $99
>list, $75 when purchased direct from Hybrid Arts.
>
I think you will be impressed. I've had SMPTE Track for a few years now and
it's a very powerful sequencer. You're right in that the only difference is
the SMPTE support. As for 'Gold' I paid for my update in November!!! I did
receive a beta version (or something) to keep me happy in the mean time but I'm
still waiting for the official 'Gold' hopefully with new docs as I found the
manual to be often confusing or incorrect.
Bob
------------------------------
Date: 4 Apr 91 23:24:28 GMT
From: IFI.UIO.NO!larserio@ucbvax.berkeley.edu (LarsErikOsterud)
Subject: MEGA STE trouble
To: Info-Atari16@naucse.cse.nau.edu
I have two problems with my new MEGA STE, and wondered if anyone out there
hadany good ideas for fixing them:
1) When using STEREO DMA sound (not normal ST sound) I get "static" (small
clicks kind of) in the sound. Sounds almost like a spark. Occurs even
when there is no sound (as long as the voulume is on). It has has no
strict pattern and occurs every now and then. Anyone have an idea ??
2) When the HDis active I get vertical flickering bars on my monochrome
monitor. The picture is flickering always, but it's really annoying
when the harddisk is working..... Is this interferencefrom the HD on
the RAM-chips (or somthing like that). Anything I can do about it ?
3) Ohhh, yes - One more thing - SYSMON doesn't work on the MEGA STE :-)
I really miss it :-(
Lars-Erik / ABK-BBS +47 2132659 / ____ ______ ________________________
Osterud / larserio@ifi.uio.no / /___ / The norwegian ST
__________/ ______________________/ ____/ / Klubben, user association
------------------------------
Date: 4 Apr 91 11:57:23 GMT
From:
noao!ncar!zaphod.mps.ohio-state.edu!think.com!paperboy!snorkelwacker.mit.edu!bl
oom-beacon!eru!hagbard!sunic!mcsun!hp4nl!star.cs.vu.nl!balaena!ttonino@arizona.
edu (Thomas Tonino)
Subject: Mice
To: Info-Atari16@naucse.cse.nau.edu
>cleaning ball. Anyone have any neat ways of cleaning the rollers
>other than Q-tips and alcohol?
>Jonathan Whitcomb UUCP: <whitcomb%aurgate@mcnc.org>
>Alcatel Network Systems, Raleigh, NC Delphi: JBWHIT
Yes I know a way to keep the rollers clean. I still have my original
1986 Atari mouse. I think it was in 1987 I greased the ball with MS4
silicone grease from Dow-Corning. Since then, i have NEVER had to clean
the rollers. However the ball is slightly more slippery, but I don't
notice except when rubbing the ball over the table by hand.
I wouldn't recommend this trick with mice with very light balls, like
Logitechs. This is just a trick I've tried and which a friend of me
has tried; I do not guarantee it any further, but silicone grease seems
quite inert to me.
Have fun and a clean mouse!
Thomas
------------------------------
Date: 4 Apr 91 22:27:41 GMT
From:
noao!asuvax!cs.utexas.edu!swrinde!elroy.jpl.nasa.gov!wciu!abode!scale@arizona.e
du (Luis Outumuro)
Subject: Mice
To: Info-Atari16@naucse.cse.nau.edu
Hi Marc,
Gee... your mouse has no ball(s)?! It must be a female mouse!
Being a female mouse, it must be unpredictable?! Ha! Alright, so that was not
very funny, but someone had to say it. And for you ladies out there, my wife
just slapped me in the head with my Golden Image male (GI-250) mouse!
Bye...........
Luis
--
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
Luis Mark Outumuro III | "Well... you're damned if you do,
Computer Office Products 818/813-1051 | and you're damned if you don't!"
Infoline 818/813-1053 | - Bart Simpson, 1990...
------------------------------
Date: 4 Apr 91 19:04:24 GMT
From:
noao!asuvax!ncar!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!dali.cs.mont
ana.edu!milton!alexd@arizona.edu (Alex Danilchik)
Subject: Spectrum/3-D/animation
To: Info-Atari16@naucse.cse.nau.edu
Can this be done:
Create a 3-D model in Sculpt 3-D, paint/render it with
Spectrum, then animate the frames?
Is there any software pacakge/integration of packages,
that can do this for me using Spectrum? I do want the
advantage of all those colors on the screen at once...
Thanks
gunnar
alexd@milton.u.washington.edu
------------------------------
Date: 4 Apr 91 21:55:21 GMT
From:
noao!asuvax!ncar!elroy.jpl.nasa.gov!usc!jarthur!petunia!csuchico.edu!ekrimen@ar
izona.edu (Ed Krimen)
Subject: Spectrum/3-D/animation
To: Info-Atari16@naucse.cse.nau.edu
In article <1991Apr4.190424.13189@milton.u.washington.edu>
alexd@milton.u.washington.edu (Alex Danilchik) writes:
>Can this be done:
>
>Create a 3-D model in Sculpt 3-D, paint/render it with
>Spectrum, then animate the frames?
>
Dunno, maybe this can help though:
>Is there any software pacakge/integration of packages,
>that can do this for me using Spectrum? I do want the
>advantage of all those colors on the screen at once...
>
There is a program called Unispec, which supposedly lets you create
Spectrum 512 animations. It's a commercial program. There's a player on
atari.archive called ANISPEC and a couple of animations: WALL, 3D-512 I think,
and another one. Unispec can be bought for under $30 mail order I think.
There's also a program, shareware or commercial, not PD, that lets you do
3D modeling in 512 colors, but I don't remember its name. I have a sample
output pic. Leave me some e-mail if you're interested and I'll post it on
atari.archive.
>Thanks
>
>gunnar
>alexd@milton.u.washington.edu
--
Ed Krimen ...............................................
||| Video Production Major, California State University, Chico
||| INTERNET: ekrimen@ecst.csuchico.edu FREENET: al661
/ | \ SysOp, Fuji BBS: 916-894-1261 FIDONET: 1:119/4.0
------------------------------
Date: 4 Apr 91 22:33:52 GMT
From: noao!ncar!gatech!emory!att!pacbell.com!tandem!netcom!yonder@arizona.edu
(Christopher Russell)
Subject: Stalker/Steno & Diamond Back II w/Cache
To: Info-Atari16@naucse.cse.nau.edu
I am looking for the latest versions of Diamond Back II with Cache (v2.2) and
the new version of Stalker/Steno (with Zmodem, etc, v3.0 ?) All of the
mail order places I have called don't have these products in stock. Anybody
know of a place that has these? I know I could probably get these both
direct, but the "Street" price on these products is much lower than the list.
yonder@netcom.com
--
Christopher Russell (yonderboy) yonder@netcom.COM or clr40@amail.amdahl.com
------------------------------
Date: 4 Apr 91 20:07:06 GMT
From:
noao!asuvax!ncar!elroy.jpl.nasa.gov!usc!jarthur!petunia!csuchico.edu!ekrimen@ar
izona.edu (Ed Krimen)
Subject: union demo 2
To: Info-Atari16@naucse.cse.nau.edu
In article <7871@jhunix.HCF.JHU.EDU> d_alvear@jhunix.HCF.JHU.EDU (Dom Alvear)
writes:
>In article <8216@crash.cts.com> chuckie@pro-odyssey.cts.com (Chuck Schul)
writes:
>>any body have number 2.i saw number 2 once it is nice and i am looking for
>>a copy of it.i have number 1 it is nice.but 2 will blow you mind with the
>>graphics and sound.wow!!!if you have it fess up dudes.if you want a copy of
>>one let me know.i will mail it out if you send 2 or 3 buck for a disk and
>>mailer.
>>----
>
>Better yet, how about you send union demo 1 to atari.archive in an
>.MSA file and the person who has union demo 2 can do the same? I have
>a burning desire to see some new demos. Also, I've asked before, but
>has anybody seen the LOSTBOYS MINDBOMB demo? I got a little taste of
>it from the RED SECTOR demo, but I want more!!!!
The Union Demo uses a strange disk format that .MSA won't recognize or work
with. If it did work, the Union Demo would have been on atari.archive a long
time ago. :~) I haven't tried Ultra, but I could give it a try. Also,
Jampacker and Pompey Packer recently posted to a.a seem to have some disk
compression. I can probably play with those a little and see what happens;
too bad they don't have docs. :~(
--
Ed Krimen ...............................................
||| Video Production Major, California State University, Chico
||| INTERNET: ekrimen@ecst.csuchico.edu FREENET: al661
/ | \ SysOp, Fuji BBS: 916-894-1261 FIDONET: 1:119/4.0
------------------------------
Date: 4 Apr 91 20:10:01 GMT
From:
noao!asuvax!ukma!rex!wuarchive!zaphod.mps.ohio-state.edu!usc!jarthur!petunia!cs
uchico.edu!ekrimen@arizona.edu (Ed Krimen)
Subject: union demo 2
To: Info-Atari16@naucse.cse.nau.edu
In article <7871@jhunix.HCF.JHU.EDU> d_alvear@jhunix.HCF.JHU.EDU (Dom Alvear)
writes:
>
>a burning desire to see some new demos. Also, I've asked before, but
>has anybody seen the LOSTBOYS MINDBOMB demo? I got a little taste of
>it from the RED SECTOR demo, but I want more!!!!
Someone on Fidonet was supposed to send me the Mindbomb demo and a couple of
other new ones; I should have gotten them a week or so ago. When or if I do,
I'll try to get them to a.a in some form.
--
Ed Krimen ...............................................
||| Video Production Major, California State University, Chico
||| INTERNET: ekrimen@ecst.csuchico.edu FREENET: al661
/ | \ SysOp, Fuji BBS: 916-894-1261 FIDONET: 1:119/4.0
------------------------------
End of Info-Atari16 Digest
******************************